Washing Machines Dosing Systems GW Multi Series
The Multi machine system allows to manage up to four washing machines. Each machines is associated with a signal module to acquire the status of the relative solenoid valves. The pumps, up to ten, are connected to the product flushing kit. This is connected to the machine flushing kit, wich allows to dose the product into the washing machine that required the dosing. The central module manages the flushing solenoid valve at the inlet of the flushing kit and the 4 solenoid valves that control the flow to the washing machines.
Central System
It’s formed by the Central Module and the Signals Module.
Central Module:
- Switching-mode power supply with PFC: 100-240 VAC 50/60 Hz
- Consumption (max): 150W
- IP65 protection degree
Signals Module
- Provided with a preassembled phone cable (7 meters)
- Up to 8 trigger signals from the washing machine
- Trigger signals in AC and DC voltage with thresholds selectable by software
Dosing Modules
It is possible to assembly a system up to 10 pumps or relay modules; moreover on it three pumps or relay modules can work at the same time
LF Pump Module:
- Max flow rate 20 l/h, speed programmable by software
- Pharmed squeeze tube. Silicone/Santoprene tube upon request
- Priming push button
- IP65 protection degree
HF Pump Module:
- Max flow rate 100 l/h, speedd programmable by software
- Pharmed squeeze tube. Silicone/Santoprene tube upon request
- Priming push button
- IP65 protection degree
Relay Module:
- Maximum load switchable up to 0.55 KW (motor driven pump or solenoid metering pump)
- Priming push button
- IP65 protection degree
Flushing Manifold Kit
Fully modular on dosing request.
Depending on number of pumps in your system, you can choose:
Flushing Manifold Kit for 3 valves
- Up to 3 valves (NPT 1/4″ junction)
Flushing Manifold Kit for 6 valves
- Up to 6 valves (NPT 1/4″ junction)
Both kit provide:
- Solenoid valve, with 24 VDC coil and IP65 protection degree
- Non-return valve to separate the chemicals with the solenoid valve
- Inlet water fitting 3/4″F
- Barb fitting outlet for 10×14 tube
- In-Out tube 3/4″
- EPDM/FPM injection valves NPT 1/4″ with barb fitting 8×12
Flushing Manifold Accessories and Spare Kits
Accessories:
Adding Module with 3 Inlets NPT 1/4″
Spare Parts:
- Solenoid valve 3/4″ M/M 24 VDC
- Seal with fitting filter
- PVC tube 3/4″-3/4″
Other Dosing System
GW Series
DOSING TANKS
PPS-EPS Series
Sistema di Gestione Certificato ISO 9001:2015 AQS/Q/VS. 3032015
